Wirtgen W1200F Cold Milling

4 Video

Sold

Wirtgen W1200F Cold Milling Machine, 48″ Milling Width, 4 Track machine w/ collapsible leg and optional right rear track steer, Track pads, Full Automatic Leveling with Depth Regulators, Low Hours, Good Condition, Ready to go to work!

Specifications

• Milling Width Max: 3’11” 1,200 mm
• Milling Depth/Milling depth FCS: 12 1/2 0-315mm | 12 0-300mm

Milling Drum

• Tool Spacing: 5/8" 15mm
• Number of Tools: 115
• Drum Diameter with tools: 39" 980mm

Engine

• Make: KHD Deutz
• Model: BF 6 M 1013 CP
• Cooling: Water
• Number of Cylinders: 6
• Output: 190 kW / 255 HP / 258 PS
• Engine Speed: 2,300 min-1
• Displacement: 140 in3 7,146 cm3
• Fuel consumption, full load: 12.5 gal/h 47.2 l/h
• Fuel consumption, 2/3 load: 8.4 gal/h 31.8 l/h

Speeds/Gradeability

• 1st milling gear: 0–49 ft/min 0–15 m/min
• 2nd milling gear: 0–108 ft/min 0–33 m/min
• Travel gear: 0–3.4 mph 0–5.5 km/h
• Theoretical gradeability, 1st milling gear: 57 %
• Theoretical gradeability, travel gear: 4.3 %
• Transversal inclination, max.: 10 °
• Ground clearance: 13” 320 mm

Weights

• Front Axle Load, Full Tanks: 20,062 lbs 9,100 daN (kg)
• Rear axle load, full tanks: 25,353 lbs 11,500 daN (kg)
• Own weight: 41,226 lbs 18,700 daN (kg)
• Operating weight, CE*3: 43,431 lbs 19,700 daN (kg)
• Operating weight, full tanks: 45,415 lbs 20,600 daN (kg)

Drive Unit

• Type of Tires: Crawler Track
• Tire/Crawler Track Size, Front: 4’4”x10”x21” 1,330x260x540 mm
• Tire/Crawler Track Size, Rear: 4’4”x10”x21” 1,330x260x540 mm

Tank Capacities

• Fuel tank: 153.2 gal 1,580 l
• Hydraulic fluid tank: 29.1 gal 1,110 l
• Water tank: 343.4 gal 1,300 l

Electrical System

• Voltage: 24

Conveyor System

• Belt width of primary and discharge conveyor: 24” 600 mm
• Theoretical capacity of discharge conveyor: 215 yd3/h 164 m3/h