Sold

Gradall 544D10-55 Telehandler Forklift

Details
Year 2002
Make Gradall
Model 544D10-55
Type Telehandler Forklift
Hours 6000
Condition Good
Transmission Hydrostatic
Description

2002 Gradall 544D10-55 Telehandler Forklift, 2WD-4WD, 55' Lift Height, At 24" load center - 10,000 lbs , John Deere 4045HF275 Diesel Engine, Turbocharged, 4-Cylinders, 125HP, Hydrostatic Drive, Certified ROPS & FOPS, 2WD and 4WD switch on dash, 6,000 hours, Great Condition! 

Performance

  • Rated Capacity: At 24 in. (610 mm) load center, 10,000 lb (4,536 kg)
  • Maximum Lift Height: 55 ft (16.8 m)
  • Frame Leveling: 8 degrees
  • Lift Speed (boom retracted): Up: 11.9 sec | Down: 9.3 sec
  • Boom Speed Extend: 18.3 sec | Retract: 17.6 sec
  • Travel Speed Forward: 2WD 0-19 mph (30.6 kmph) | 4WD 0-6.5 mph (10.5 kmph)
  • Drawbar Pull (Loaded): 18,400 lb (8,346 kg)
  • Operating Weight: With 48 in. (1.2 m) carriage and forks, 33,570 lb (15,227 kg) 

Standard Specifications

Engine

  • Make: John Deere
  • Model: 4045HF275
  • Aspiration: Turbocharged and Aftercooled
  • Fuel: No. 2 Diesel
  • Cycles: 4
  • No. of Cylinders: 4
  • Displacement: 276 cu in (4.5 L)
  • Rated Speed: 2,500 rpm
  • Max Gross BHP:  125 hp (93 kW)
  • Fuel Tank: 38 gal (144 L)

Engine Filters

  • Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector plus replaceable dry filter element. Visual service indicator. Replaceable spin-on fuel filter. Full-flow replaceable spin-on engine oil filter.

Electrical System

  • Voltage: 12V Alternator: 65 amp Battery: 1050 cold cranking amps at 0°F

Hydrostatic Drive

  • 6,300 PSI (43,437 kPa) closed loop with piston pump and motors. All hydraulic connections ORS and Code 62 O-ring flanges. Integral reservoir with implement hydraulics. 8 micron suction filter for charge pump. Self-contained, swashplate design, variable displacement, over center, piston pump. Neutral start switch. (Park brake must also be engaged to start.) 2WD — 4WD inching. Audible back-up travel alarm mounted in counterweight area signals reverse movement.

Axles

  • Planetary hubs with piston motors on rear axle. Piston motor-driven planetary front axle with high-bias differential.

Service Brakes

  • Hydraulic wet disc brake on each front wheel. Hydraulic dynamic braking on front axle and both rear wheels.

Parking Brakes

  • Parking Brakes Wet disc spring-applied electro/hydraulic release, fail-safe on both front wheels. Light on dash indicates when brakes are on.

Tires

  • Standard: 14:00 x 24 — 12PR, G2 type.

Cab

  • Certified ROPS/FOPS structure with horn, back-up alarm and standard right side rear view mirror. Forward, neutral, reverse lever on left of steering column. Single foot pedal control provides both braking and inching for lifting while maneuvering vehicle. Electro/hydraulic traction lock valve for superior tractive effort.

Steering

  • Hydraulic power steering with manual backup. Rear wheel steering, 90° pivot around either front tire. Outside turning radius is less than chassis length.

Instruments

  • Volt meter, hourmeter, engine oil pressure, temperature, fuel gauge. All gauges protected by clear acrylic cover.

Controls

  • Controls Grouped for operator comfort and convenience. 2WD and 4WD switch on dash. Boom lift and crowd on single joystick. Right-hand tilt and sway lever. Foot throttle. Floor mounted traction lock switch.

Hydraulic System-Implement

  • Single-section gear pump. 40 gal (151.4 L) system capacity. 8 micron filter with visual service indicator and suction strainer. Lift, crowd, tilt and sway cylinders have safety checks to prevent dropping of load in the event of hose or other hydraulic failure.

Auxiliary Hydraulics

  • Used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls and hydraulic lines.