Bobcat T630 Skid Steer

Bobcat T630 Skid Steer, Kubota 74.3 HP, Interim Tier 4, Turbo, Diesel, Liquid Cooling, Fully Hydrostatic, Tracked, AC, LoJack, All-Maintenance Points Serviced, 1,900 hours, Ready to Work!

(NOTE: AVAILABLE ONLY VIA APPOINTMENT. PLEASE GET IN TOUCH AND SCHEDULE AN APPOINTMENT.)

Engine

• Make: Kubota
• Model: V3307-DI-TE3
• Engine Tier: Interim Tier IV
• Fuel: Diesel
• Cooling: Liquid
• Horsepower: SAE J1995 Gross - 74.3 HP @2400 RPM | ISO 9249 EEC / SAE J1349 Net - 70.3 HP @2400 RPM
• Torque: SAE J1995 Gross - 195.0 ft.-lb. @1600 RPM | ISO 9249 EEC / SAE J1349 Net - 186.7 ft.-lb. @1600 RPM
• Low Idle RPM: 1250 - 1450
• High Idle RPM: 2525 - 2650
• Number of Cylinders: 4
• Displacement: 203 cu. in.
• Bore / Stroke: 3.70 in. / 4.72 in.
• Lubrication: Gear Pump Pressure System with Filter
• Crankcase Ventilation: Closed Breathing
• Air Cleaner: Dry replaceable paper cartridge with separate safety element
• Ignition: Diesel - Compression
• Air Induction: Turbo-Charged
• Engine Coolant: Propylene Glycol / Water Mixture
• Starting Aid: Glow Plugs - Automatically activated as needed in RUN position.

Drive System

• Main Drive: Fully hydrostatic, rubber track drive
• Transmission: Infinitely variable tandem hydrostatic piston pumps, driving two fully reversing hydrostatic drive motors
• Tracks (Tension): Grease cylinder and spring

Controls

• Vehicle Steering: Direction and speed controlled by two hand operated steering levers or optional joystick(s)

Loader Hydraulics

-Lift and Tilt: Controlled by separate foot pedals or optional Advanced Control System (ACS)

-Front Auxiliary: Controlled by electrical switch on Right Hand steering lever or joystick

• Auxiliary Pressure Release: Pressure relieved through quick couplers; Push couplers in, hold for 5 seconds
• Engine: Hand lever speed control; key-type start switch or optional Deluxe Instrumentation Panel and function error shutdown.
• Starting Aid: Glow plugs automatically activated as needed by Instrument Panel
• Service Brake: Two independent hydrostatic systems controlled by two hand operated steering evers or optional joystick(s)
• Secondary Brake: One of the hydrostatic transmissions
• Parking Brake (Standard): Spring applied pressure release multi-disk brake activated by manually operated switch on left instrument panel

Hydraulic System

• Pump Type: Engine driven, gear type
• Pump Capacity - Standard: 23.0 GPM
• Pump Capacity - High-Flow Option: 30.5 GPM
• System Relief at Quick Couplers: 3450 - 3550 PSI
• Filter (Hydraulic / Hydrostatic): Replaceable beta 10 micron = 200, drop in element
• Filter (Charge): Replaceable beta 10 micron = 200, drop in element

Hydraulic Cylinders: Double-acting; tilt cylinders have cushioning feature on dump and rollback

-Bore Diameter: Lift Cylinder (2) - 2.50 in. | Tilt Cylinder (2) - 3.00 in.

-Rod Diameter: Lift Cylinder (2) - 1.75 in. | Tilt Cylinder (2) - 1.63 in.

-Stroke: Lift Cylinder (2) - 33.87 in. | Tilt Cylinder (2) - 13.97 in.

• Control Valve - Standard: 3-Spool, open center, manually operated with spring detent for lift float and electrically controlled auxiliary spool
• Control Valve - ACS and SJC: 3-Spool, open center with electric actuator controlled lift with float and tilt. Electrically controlled auxiliary spool
• Fluid Lines: SAE Standard tubelines, hoses and fittings
• Fluid Type: BOBCAT FLUID, Hydraulic / Hydrostatic | 6903117 - (Two - 2.5 Gal.) | 6903118 - (5 Gal.) | 6903119 - (55 Gal.)

Hydraulic Function Time

-Raise Lift Arms: 3.4 Seconds

-Lower Lift Arms: 3.0 Seconds

-Bucket Dump: 2.3 Seconds

-Bucket Rollback: 1.7 Seconds

Capacities

• Fuel: 27.3 Gal.
• Engine Oil with Filter Change: 12.0 qt.
• Engine Cooling System: with Heater - 3.1 Gal. | without Heater - 3.0 Gal.
• Hydraulic / Hydrostatic Reservoir: 2.7 Gal.
• Hydraulic / Hydrostatic System: 11.0 Gal.
• Hydrostatic Drive Motor (Each): 7.1 fl. oz.