|
|
|
|||||||||
|
|
|
|||||||||
|
2005 Gradall 534D 10-45 Telescopic Telehandler, John Deere Diesel Turbocharged Engine, 115 HP, Hydrostatic Drive, Certified ROPS & FOPS, Hydraulic Power Steering, Switchable 2WD & 4WD, 4,116 hours.
Performance
Standard Specifications
Engine
Engine Filters
Two-stage dry air cleaner — centrifugal pre-cleaner with continuous dust ejector plus replaceable dry filter element. Visual service indicator. Replaceable spin-on fuel filter. Full-flow replaceable spin-on engine oil filter.
Electrical System
Hydrostatic Drive
6,300 PSI (43,437 kPa) closed loop with piston pump and motors. All hydraulic connections ORS and Code 62 O-ring flanges. Integral reservoir with implement hydraulics. 8 micron suction filter for charge pump. Self-contained, swashplate design, variable displacement, over center, piston pump. Neutral start switch. (Park brake must also be engaged to start.) 2WD — 4WD inching. Audible back-up travel alarm mounted in counterweight area signals reverse movement.
Axles
Planetary hubs with piston motors on rear axle. Piston motor-driven planetary front axle with high-bias differential.
Service Brakes
Hydraulic wet disc brake on each front wheel. Hydraulic dynamic braking on front axle and both rear wheels.
Parking Brakes
Wet disc spring-applied electro/hydraulic release, fail-safe on both front wheels. Light on dash indicates when brakes are on. Frame mounted right side rear view mirror.
Tires
Cab
Certified ROPS/FOPS structure with horn, back-up alarm and standard right side rear view mirror. Forward, neutral, reverse lever on left of steering column. Single foot pedal control provides both braking and inching for lifting while maneuvering vehicle. Electro/hydraulic traction lock valve for superior tractive effort.
Steering
Hydraulic power steering with manual backup. Rear wheel steering, 90° pivot around either front tire. Outside turning radius is less than chassis length.
Instruments
Volt meter, hourmeter, engine oil pressure, temperature, fuel gauge. All gauges protected by clear acrylic cover.
Controls
Grouped for operator comfort and convenience. 2WD and 4WD switch on dash. Boom lift and crowd on single joystick. Right-hand tilt and sway lever. Foot throttle. Floor mounted traction lock switch.
Hydraulic System-Implement
Single-section gear pump. 40 gal system capacity. 8 micron filter with visual service indicator and suction strainer. Lift, crowd, tilt and sway cylinders have safety checks to prevent dropping of load in the event of hose or other hydraulic failure.
Auxiliary Hydraulics
Used for all attachments equipped with cylinders or other hydraulic components. Consists of valves, controls and hydraulic lines.